Their services include product design and product customization, special solution design, lighting design tasks, photometric calculations, product certification. Product specialisation: track and surface mounted Spots & floods, Interior and IP rated, in-ground up lights, Interior “Cool” range and IP rated exterior, exterior solid bronze, corrosion proof spots, floods and in-ground up lights, down lights – LED, Low-voltage, compact fluorescent and metal halide. 12 years’ experience in development of LED products, utilizing the first 5mm Nichia WHITE LED’s within our worldwide patented Exodus emergency luminaire’s.
Cube’s in house product design team are continually solving clients’ problems by creation and production of bespoke solutions.
Polymer, their partnership with Reynolds Polymer Inc. grant them priority access to the world’s premier “Acrylic” manufacturer, Reynolds acrylic casting and fabrication skills have made them the Company of choice for large scale aquarium / signage / pharmaceutical / avionics / automotive and display projects. More details about this project on the dedicated website www.reynoldspolymer.com
Beamer 111 recessed plaster in “trimless” ceiling housing for 2 x Beamer lamp assemblies. The lamp assemblies are available in three lamp options: AR111, CDM-T (G12) and CDM-R111. The ceiling housing and lamp assemblies (2 required) are ordered separately for easy site assembly.
Lamp assembly snap fits into ceiling housing with two additional security screws, or factory assembled at no charge. Ceiling fixing is via 2 brackets fixed to rear of plaster board, ceiling housing attaches to brackets with thumb screws allowing precise adjustment for differing ceiling thicknesses, available in white or black.
Fluxline is a modular system of miniature extrusions designed to create a high output linear LED system to fulfill most applications. The high precision HE30 extrusions are populated with our high power, 25W/M tri-chip Fluxline tape with LEDS @ 10mm pitch. The system allows for recessed, surface or edge mounting and the “H” section profile creates a cable routing channel in the rear of the extrusion to conceal and protect cables. Supplied with polycarbonate Mounting clips, Spacer blocks-used when Standard profile fitted within Mounting channels, Corner blocks-used to fit Fluxline within internal corner to tilt extrusion by 45°.
3 different profiles available: “Standard” (18.5 x 18.5mm), “Deep” (18.5 x 26mm), “Edge” (18.5 x 29mm).
Supplied in maximum individual lengths of 1.5M (can be cut at 30mm increments)
All versions available encapsulated to IP66 (add Prefix: “FLX-IP”)
Load: 25W/M@12VDC (Max current through tape = 10A (4.8M))
Output: 2067 lms/M (Warm White=82.68lms/W)
LED colour: Warm white (WW-2800°K), Cool white (CW-4000°), Blue (B-455nM), Green (G), Red (R), RGB (RGB).
Lens options: Standard Ribbed clear (S), Opal (O), Clear Collimating +/- 60° (C).
Typical product code: “FLX-IP/600/WW/D/O/SAN” (Fluxline-IP, 600mm, Warm White, Deep, Opal, Silver anodised)
Optional mounting channels:
Recessed Channel (RC) used for grouting into tiled floors/walls etc.
Trimmed Channel (TC) used for mounting in timber etc. where cut edge needs to be concealed.
Plaster-in Channel (PIC) used for plastering over to create a trim less mounting channel.
Typical product code: “FLX/600/RC/SAN” (Fluxline, 600mm, Recessed channel, Silver anodised)
Finish options: Silver anodised (SAN), Black anodised (BK), Antique Bronze (ABZ)
The Lateral range is an extensive family of single and multi-head ceiling recessed down lights. The LED head / heat-sink assemblies feature an innovative tilt, rotate and a vertical telescopic sliding mechanism, allowing heads to project light parallel to the mounting surface, this allows considerably more flexibility in fitting placement compared to standard gimbal type luminaires.
Versions available: switched / 0-10V dimming / mains dimming / DALI or DMX dimmable drivers.
Fitted with the high output “Osram Golden Dragon+” LED’s @3150°K (warm white) as standard and the ceiling fixing is via “screw jack” support legs. The lateral range is available with single 3 / 6 / 9 or 12 LED heads, square and circular fittings. Multi-head, twin, triple and quad assemblies. Offered as standard with 15° lenses, 24° or 35° available to order. The luminaire requires a remote constant current 350mA driver(s).
Typical candela figures/12 LED head: 15° = 7676cd, 24° = 4104cd, 35° = 1647cd.
The Quartet is a range of multi-LED exterior IP65 directional spotlights, fitted with glare-shields and 2m of Butyl extra tough 2 core flex. Populated with high output “Osram Golden Dragon +” LED’s @ 3150°K (warm white) as standard. Available with 3 / 6 / 12 or 15 LED’s. Offered as standard with 15° high efficiency collimating lenses also 24° or 35° to order. Manufactured from precision machined silver anodised aluminium, toughened safety glass lens and anodized lockable aluminium stirrup.
Optional Tree strap or ground Spike to be ordered separately.
The luminaire requires a remote constant current 350mA driver, versions available include: Switched / 0-10V dimming / Mains dimming / DALI or DMX dimmable drivers. Finish: Silver anodized.
Quartet 125/W12 outputs: 15°= 7676cd / 24°= 4104cd / 35°= 1647cd (Candela figures based on W/white LED’s @ 350mA)
Spike: “Qua/Spike/BK” Tree strap: “Qua/T-Strap/BK”